Home assistant 3 speed fan. Hi everybody, My english isn’t that good.

Home assistant 3 speed fan 194 device_id: XX local_key: YYY friendly_name: Office fanlight protocol_version: "3. 5C where it will reach the maximum fan speed of Hi everybody, My english isn’t that good. esphome. 2 Frontend 20220707. Wich card is Fan speed (low, mid, high) I controled with 3 relay switch. The other part is the favorite fan levels (1-2-3), to my understanding, it needs to be changed into the fan_percentage. I have my Office Ceiling Fan with the sonoff ifan03 integated with Home Assistant for almost 2 years now, using the AlexxIT/SonoffLAN integration, which is working I have a ceiling fan which set it as Speed 3, Speed 2, Speed 1, Off. I haven’t wired it all up and tested yet. I have not yet upgraded to the JS integration. I created a template to transform the humidity percentage to a fan speed, low(33), medium(66) or high(100). I’ve looked and looked, but I I also use bond for controlling 3 fans. and than can be easily achieved with the exhaust fan speed as described above easy, if I do it manually! as when the RHm rises I increase fan My code is working correctly and I can turn off the fan and on as well But it only works on full speed and lower speed of 1,2 and 3 doesn’t work I’m using: 2. I was previously able to do this with my HS-PI-Zee using google home before their google home integration broke, which caused me Greetings. 0 firmware and later (Legacy SenseME firmware not supported) When Whoosh is enabled, the fan will latch to the current speed and vary the speed from the latch point. Trying to create single 3 speed fan entity from 3 switch entities Home Assistant Community Ceiling fan controller. Are there easier integrations I can use to control my fan speed? With the fan domain you can create components that appear as fans in the Home Assistant frontend. 🙂 I’m running into issue where the Fan Level entity does not have its Speed state hi guys, I wanted to use my ifan04 on my existing fan/light. If anyone is still struggling with the fan speed script - I found when I did the trace, the choose didn’t function because the number passed is ‘33. You could actually do this with the standard input_number component but you wouldn’t have the toggle switch to turn it off. Power none of the 3 speed wires and the fan is off, power two or more and the fan is off permanently. In my case the fan always turns on to speed 1 (33%) 66% would mean I need to increase the fan speed by 1 step; 100% means one step above 66% Is this possible? Everything seems to be 3 speed, which is never set to the speed I’d like. 2v = high speed Each push of the button moves from the current speed to the next. I wrote a small python zwift-mqtt. Some of the inline 4" vent fans like this one have a speed I’m trying to regulate a fan based on the humidity in a room. I have a large industrial type fan for keeping me cool, and it has 3 fan speeds on it as a switch on the back of the device. localtuya: - host: 192. 0 Operating System 8. 05. Kniki (Nikola) October 15, 2024, 11:34pm 1. No matter what state the fan is in the “off” is highlighted and no other button. For several weeks now I have been struggling with a trivial task - controlling several PC fans using ESPHome. However the fan speed settings do not appear. Sometimes you want a bit warmer and sometimes a bit cooler. I am somewhat new to home assistant and I want to create an automation that when I press the power on button on my zwave switch, if the ceiling fan is already on, it increases the speed of the fan. edlentz (Ed Lentz) June 2, 2023, 2:17am 1. But I don’t understand the If you are using the Big Ass Fans integration, it provides 7 speed steps. template/ In set_preset_mode pass off the preset to a script as a parameter. 0’ not ‘33’. It only has 3 buttons: Speed 1, Speed 2, Speed 3, and OFF. There’s no speed option in automations / scripts however. Those will fork into different abilities depending on where in home assistant it’s being used. - id: master_fan_sleep alias: 'Master Fan Sleep' trigger: # Time For Sleep Scene is called before going to bed every night - platform: event event_type: call_service event_data: service_data: entity_id: [scene. Ref. 0. I couldn’t change the units though, the ClimateEntity class can only use temperature as the unit. bond fan entities in dashboard. 1 - latest Solved. 🙂 First of all, I appreciate my Leviton VRF01 fan controller being treated as a “Fan” by default instead of a dimmable light, the way the Vera dealt with it. 7) following the design and indications of the Andreas Spiess blog (videos # 131 and # 138), the contributions of “umerfraz” and rest of that thread. 5C it will increase to 4 and so on, up until 23. Worked Great with the Hi, I am brand new to Home Assistant. It’s also useless through voice commands, which is the rest of the families preferred method to control it. How do i group all of this Dear community, Is it possible to have a slider or nice visual element on Lovelace UI to control my Dyson fan speed? It goes from 1 to 10 then auto and night modes. io/t/haiku-senseme-smart-fan-support/4702/124. String or list of strings that define the entity ID (s) of fan device (s) to control. I The fan. Also after 1 hr of being on speed 2 or 3 it goes automatically to speed 1. My question was about being able to regulate the fan speed to achieve the following Hi all, I would like to control the fan speed by pressing the fan icon buttons (last row). I am trying to use last_changed to achive this: {{ as_timestamp(now()) | round - as_timestamp(states. e. if the humidity spikes due to someone having a shower then I run the fan at higher speed for a set period of time. ZW4SF fan switch with 4 speeds. mclever (mclever) November 20, 2024, 3:19am 4. This is my current simplified configuration. Using a slider with 4 positions you could use the custom:slider-entity-row card and an automation triggered on the slider or switch to set the fan speed (templates involved if you dont want multiple automations). LED Indoor Low Profile New Bronze Ceiling Fan with Light Kit from The Home Depot. Creating Virtual Switches - #3 by rfrenzl), the options are really really very limited. 4v = low speed 8. I also have a Xaiomi temp sensor (Aqara) reporting the room temperature. state|float > 75 %} 100 {% elif Hello, I am trying to control my Eufy robot vacuum with a Broadlink RM Pro (IR universal remote) and a Template Vacuum entity. If its already on high it goes to the lowest speed. But I am unable to make this template )given below) working to change speed. On a second fan it show increase/decrease the light brightness. MOz (Meini) November 23, 2024, 5:25am 9. Writing the automation to simply look and see if the fan speed setting is changed to high works, but only if the prior speed setting was not already set Thank you. I’m on hassio 163 (0. google. The documentation doesn’t mention anything about setting a fan speed. It has 8 speeds and if you - when on 1 it goes to 8 or if you + when on 8 it goes to 1. Home Assistant Animate your Icons - Spin / Flash / Rotate - YouTube If I could code I was thinking that maybe this might help The primary issue is identical to above where setting a speed in home assistant causes the fan to turn off and the speed in HA to revert to the previous remote setting. Sir_Goodenough has a working input I recently replaced my ceiling fan switch with a Z-Wave 3 speed fan controller. Hello, I am new to both KNX and Home Assistant. I am trying to make a template fan entity exactly like the this image from the HA website: For the speeds and off, I made input buttons that call an automation to trigger the send remote I have a QuietCool fan in my attic (DIY as a whole house fan) that is controlled with the QuietCool Smart Control (model: IT-AF-SMT). EndUser June 2, 2023, 2:10pm 7. To target all fan devices, use all. I have a Z-Wave switch I can use to turn the fan on and off. set_percentage or fan. Ahh gotcha, forgot to change speed: auto to preset_mode: ‘auto’. For each command I have a script, emulating the remote and thus send the command to the fan. A fan can be switched on or off, optionally has a speed between 1 and the maximum supported speed of the fan, and can have an oscillation and direction output. I have this working on my HASSIO system, but I can’t get the buttons to change colors as I’d prefer. Sets I have clearly declared the use of the fan service instead of the homeassistant service to turn/turn off on or control the speed. Mahko_Mahko (Mahko Mahko) April 4, 2024, 9:40am (no cloud) - ESPHome - Home Home Assistant is open source home automation that puts local control and privacy first. 168. refer to SMARTIR Broadlink Hello All, I am inquiring to see if anyone knows how to enable the Fan Speed Control as I have multiple HomeSeer Z-Wave fan switches which allow 3 & 4 speed fan control which only show up as on or off currently in google home. As i need to adjust the speed of the fan instead of just being able to turn it off and on. 3uF 400V x1 220kohm 1/4W x2 2. command_line] Command failed: In my case, I set it from 1 to 5 and hence my brightness slider % to fan speed mappings work as follows: Slider 1% = Speed 1 Slider 25% = Speed 2 Slider 50% = Speed 3 Slider 75% = Speed 4 Slider 100% = Speed 5. Thanks in advance. This is my project: And here: This is my current configuration/code. Hi, is it possible to change the climate default fan speed mode from AUTO / LOW / MEDIUM / HIGH / TOP (HA default) to AUTO / LOW / MID / HIGH / STRENGTH (What i read on tuya developper tools) Cause my A/C unit didnt accept MEDIUM and TOP command Thanks! Part 1: How to convert a 3-Speed Desk Fan using a Sonoff Basic, a 2-Relay Module and ESPHome. I created an automation but its not triggering for some reason alias: Master Fan Speed description: Set fan speed when Help needed: Setting Fan Speed via template. even I’ve created my own fan speed control using a yardstick one and some custom RF commands for a Hampton Bay fan. Hunter Oakhurst 52 in. Fan Preset Mode: Controls the fan with set preset modes based on room temperature. I would like to have a dashboard that shows as speed the slider which goes from 1 to 3 and the automatic return to 1 after the timer. The min/max value would be set via the offset. emilie_s_office_purifier_fan type: custom:multiple-entity-row name: Air Purifier secondary_info: attribute: percentage name: Speed unit: '%' state_color: true toggle: true show_state: false @bphillips921 If you don’t use your light output from the ifan02 you could run that into your original fan capacitor as you were happy with the low speed from that. I want to do this when the humidity is in a range for a certain period. It should work with any fans that use percentage step control and allows for fans where the integration shows maximum speed different to 100%. Since your fans still contain the speed lists they will continue to work with the fan-control-entity-row plugin until the speed lists are completely removed/no longer supported. Home Assistant Community Fan Coil thermostat. lumi_lumi_weather_humidity. yamlThe configuration. eanagley (marchingphoenix) September 26, 2020, 8:17pm 7. is there someone that can help me I asked some time ago how I could control a zwave fan with home assistant by voice (with the google assistant). Home Assistant Community PWM Fan with 3 pins? ESPHome. I seem to have configured everything properly except for the fan speeds. turn_on: high fan: - platform: speed id: custom_fan output: ceiling_fan Interestingly the buttons updated on the fan-control-entity-row plugin. Invitation Link to join my Exclusive membership:http Home Assistant is open source home automation that puts local control and privacy first. In general, there are a couple of the most common fans for a 120x120 case. 5C the fan speed is increased from 1 to 2, at 22C the fan speed increases to 3, at 22. To trigger speed 2 the relay needs to be trigger for half a second, same to go from 2 to 3 or from 3 to 1. Hi everybody, InShot_20230621_100434040 You can control speed on 3-pin fan, too, but you’d need MOSFET (or NPN transistor) to regulate it’s power supply. But for 3-speed fans the selectable percentages are 0%, 33%, 67%, and I’ve been searching and I cannot find the answer to this. Question is that i have a fan with the following controls: On/Off, Swing, Speed, Timer. reading time: 5 minutes. Im moving all controls to home assistant therefore stateful controls will be on home assistant directly and there will be no physical/external controls for it. I need to change speed to speed_count and remove low, medium, high. 9 Mhz. We've tested the following Zigbee sticks to work with our Blue Series switches: Bool. but the problem now is e. Supported devices . I need to be able to control the fan speed, 3 speeds and I’m not seeing an option. For example silence mode, low mode, medium mode, maximum mode, boost mode, aut Better it shall support humidifying action and dehumidifying action. Given this code (esphome 1. operation mode) is only available in a popup window when I have the GE Enbrighten Z-wave fan speed controller operating in HA and Homekit. Commit on GitHub: Set fan speed percentage based on @Bieniu I’ve added the custom component and I’m able to control the Xiaomi fan. The below config works correctly when using the It can control speed through Home Assistant- when you configure the fan you have to configure a few extra settings to control speed (which is mapped to value 3 it appears): Screenshot from 2022-03-22 09-03-56 400×621 7. This works well but the only problem is the last fan speed stays selected when you turn the fan off . The app can control the 2 speed fan, shows the humidity & temperature, and has a few other features. The switches are Leviton. I have been mucking around with all the Actions in Automation’s and I can’t see how to get this to work. What I am currently trying to figure out is how to utilize one For example, the ESPHome Speed Fan component provides three available presets by default: Low, Medium, and High. Frontend plugin to control fans in Home Assistant using percent values for speeds - GitHub - finity69x2/fan-percent-button-row: Frontend plugin to Works totally fine with HA and Tuya integration. sensors_fans()" unit_of_measurement: "RPM" Of course that would be far too easy. Try Again after clear cache. Link to write-up: https://docs. I have an indoor pain cave where I bike indoors during winter. The esp is handling the physical buttons on the fan nicely. alias: Study fan speed action sequence: - choose: - conditions: - condition: state However home kit translates speed into percentages. I want to use the GitHub - finity69x2/fan-control-entity-row: Provides a means to show a compact graphical control row for 2 or 3 speed fans in Home Assistant with this setup but it does not work as expected. 2uF 400V x1 3. Took the plastic box apart, it uses a Esressif Hi, would it be possible to add modbus fan entity speed control? It would be very useful for these entities to be able to select the speed. I have a fancoil which speed gets set through 3 contacts, one for every speed. video: Control Your House with a Stream Deck // Home Assistant API - YouTube. Execute Speed 3, (fan speed 3 activated) and icon lighted in green. You have a number of options. I have an Enbrighten Z-Wave In-Wall Smart Fan Control switch. There is a version for a 3 speed MQTT Fan & another version that communicates thru a Home Provides a means to show a compact graphical control row for 2 or 3 speed fans in Home Assistant - finity69x2/fan-control-entity-row. I’m trying to get the RPM from a CPU fan. Hi, I have a Breville Easy Air Purifer connected via Hello! New Home Assistant user, migrating nodes off of my Vera Lite that’s on its last legs. I have clearly declared the use of the fan service instead of the homeassistant service to turn/turn off on or control the speed. is there a smart device like a relay from Shelly that i can wire into the fan to control the three switch settings from home assistant. Hello everyone! i have an issue lately with my ifan03 from sonoff and homekit integration in Home Assistant i have not been able to short out using the forum or any other resource out there. It uses Bluetooth and connects to their app (QuietCool Smart Attic Fan Control). Those you’d just have to set once as the “temperature curve” would then move up and down based on the set temperature. The ventilation is low with both are off. I have it all in 4 automations but my automations page is getting crowded Is there any Hello everybody, I’m setting up the climate control in my house for the first time in Home Assistant. Google home reports both types as 'Device Type: Fan" The differnce is the one that doesn’t show up in HA has 3 speeds, and the one that does is a continous speed controller (aka dimmer) Dear all. Powered by a worldwide community of tinkerers and DIY enthusiasts. My first attempt at this was pretty clunky and used 3 separate automations for the three fan speeds. 6 Supervisor 2022. Trial_Master March 8, 2023, fan_modes: auto, speed 1, speed 2, speed 3, speed 4, speed 5, speed 6 swing_modes: off, vertical, horizontal, both current_temperature: 27 temperature: 24 fan_mode: speed 1 Hope this will give other user ideas and a little bit of help Ill keep add to this as I think of more ideas on making the FAN SMARTER with the help of HA 2 replay 1 for on/off other one for speed (off= low / on=high Yellow is the hot wire red = low speed black = high speed Blue is power on/off red vcc 5v form the Wemos black gound form wemos yellow D1 on the wemos relay1 other For dashboard UI features: - type: fan-speed type: tile entity: fan. After doing so, I wanted the fan to automatically turn on whenever our office got too hot. zamb October 12, 2020, 10:50am 1. If anyone is I’ve added many Lutron Caséta dimmers and switches and have them working perfectly. maybe you can help me there too. However, I have not seen any instruction for actually accomplishing this. I’d love to help please. Sonoff iFan03 fan speed control from a wall plate independent of Home Assistant with a little modification to the code and recompile of the firmware. I’m using the html code that undertoe posted in post 3 with the addition added by jonmayer in post 14. I can change the fan speed in the Tuya app, but those entities don’t seem to appear in HA. However, I just installed my first Lutron Caséta Smart Fan Speed Control switch (model PD-FSQN-WH) and have run into some oddities with the core Caseta integration (core-2021. That the contractor bought for me. Just after receiving the BroadLink hub I found out it does not output a signal lower than 315 MHz, where this fan controller uses 303. And I have changed how the mapping is done between the temp_range and the Home Assistant Community Wemos D1 Mini + Get fan-speed (RPM) ESPHome. I have configured a Siemens RDG200KN thermostat as a climate entity in home assistant. I have a switch that I’m trying to write automation for and I could use some help. Please, how I can create fan mode in generic thermostat or simple thermostat. Instructions on how to setup Fan devices within Home Assistant. . home-assistant. {% if states. false = Ceiling Fan (3-speed) mode Bool. But I also would really like to figure out a way to not have to say “set the fan to 33% for low speed”. This blueprint is based on the work of Sam04. Ultimately I’d like to be able to choose a Hi asked this over on reddit but didnt get much help so copy pasting here I’m trying to set a starting speed for a fan so when its turned on it defaults to something like 20%. Fan speed (low, mid, high) I controled with 3 relay switch. Hi everyone, Hope your 2021 has started well. yaml section anther non of the options worked for me. Check HACS for slider-entity-row custom card. The speeds are read from the speed list, and displayed when you click the fan, I can control the light using the standard fan toggle switch, but don’t see Home Assistant Supervisor 2022. true = On/Off I have several Leviton ZW4SF-1BW 4-speed fan controllers. homekit. So I can only send commands to step the speed one step in either direction. central For fan Finished installing my whole house fan. Home Assistant Community Air purifier fan speeds. andrew_fan. So for a 3 speed fan you may have to tell Siri to turn fan to 30% or 60% or 100%. Data types being right are more important in a system like HA than in HomeKit. Anyone has any recommended hardware to turn it smart? I looked at this GE switch, but the switch is in a triple frame with narrow stile switches. Thank you for making that bit of magic happen. 103 and System, HassOS 3. I’m in the process of trying to change over from SmartThings. I try to take the figure of the speed of the fan. The Leviton D24SF-1BW would be ideal, but from the reading I have done, it is not supported by Home Assistant. Yeah making speed 2 slower would work for me too. io. Using the Generic Thermostat component along with an automation, the fan will slowly start to speed up depending on the temperature difference between the thermostat and the room’s actual This blueprint automates speed control of your fans in relation to your chosen temperature range. The second setting barely moves the fan, and the third setting it’s at 100% speed. Execute Speed 2, (fan speed 2 activated) and icon lighted in green, but Fan speed 3 icon still lighted in green. Besides the Inside temperature threshold at level 1 of your fan (33%), there are a Mid-Temperature for The fan is normally at speed 1. I’m going to do this through three Home Assistant is open source home automation that puts local control and privacy first. The fan you’re using just happens to only supply percentage, so that’s what you need to use. A similar problem was fixed in the old interface --> Fan Control. chrislimk (Chris Lim) May 5, 2022, 3:21pm 21 @PatrickHASS. Hi! Does anyone know of a simple one-liner script for command line sensor to show CPU fan RPM (speed)? My temps are usually at 39-40 but I wonder if that’s because of the regular ambient temperature in the room or because the fan is working hard to keep it that way. Has anyone got this working in lovelace? Howdy, about a year ago I took a cheap three speed fan from Amazon and made it “smart” by taking an ESP8266 and some relays and throwing that all In my experience my DC FAN was controlled by a 433MHz RF remote control. All elements you see are updated in real time automatically by Home Assistant over wifi. My fan existing controller has 2 wires IN and 5 wires OUT (2 for light, 3 for fan), the ifan04 has 2 wires IN and only 3 wires OUT (1 for fan, 1 for light, 1 common). But can you control the speed with the “Main Fan Controller”-device you have in HA now? I’m building a 4" vent system in my shop to handle the smoke from the laser on the CNC and to vent the fumes from the plastic filaments from 3D printing. I’m hoping someone can shed some light on whether there’s an Home Assistant is open source home automation that puts local control and privacy first. I did end up figuring it out so I thought I’d post the info in case it helps someone else. Fan — On / Off — Speed - Slow, Medium, High If you are ready to help for a reward, pm me for the details. So to set the speed to low you have to close the first contact, medium is the second one and high is the third one. 2): substitutions: display_name: test_d1mini_2 use_address: !secret iot_ip_test_d1mini_2 static_ip: !secret iot_ip_test_d1mini_2 esphome: platform: ESP8266 board: d1_mini name: ${display_name} wifi: use_address: ${use_address} ssid: !secret iot_wifi_ssid This blueprint automates speed control of your fans in relation to your chosen temperature range and fan speed range. 4, Home Assistant OS on NUC). lokitol (Lokitol) May 18, 2022, 6:11am 1. Currently each fan has 3 entities - 1 is the switch on the wall, 1 is the fan speed and one is the fan light. automation. Does anyone has experience of using the iFan04 on a 5 speed fan ? Thank you. If no contact is closed, the fan stays off. 'Fireplace Fan Speed': Sending state 0. I have a bunch of sensors setup and I want to have some manual control as well. By breaking them individually into widget, it works. ESPHome Standalone 120 Volt AC Blower/Fan Speed Controller Control the speed manually with a button or set it to adjust automatically based on temperature ranges. I have a fan that uses broadlink ir therefore there is no state from device directly. I did not have GND connected from the source for the ESP32 board and from the power supply for the 24V fan Hello, Can you add on tado integration control of fan speed and swing controle for AC ? Thank in advance Edit : I find why, seem tado change some key name and integration don’t handle it, I open an issue Tado : handle fanLevel and verticalSwing · Issue #95389 · home-assistant/core · GitHub I hacked something together - I copied the generic_thermostat component to generic_aqi_controller, and added some code to control the fan speed based on hard-coded thresholds. It failed with: ERROR (SyncWorker_4) [homeassistant. This is what my helper looks like: 2020-05-26 11_19_01-Configuration - Home I have an exhaust fan with a three way switch: two speed settings and off. I used helpers to calculate the desired I have a fan controlled by IR. With not wanting to risk cooking Exactly! I’m thinking like you set the desired temperature on your AC unit with your remote. I’m trying to find a good solution for setting the speed of the fan from Home Assistant. jj77669: So, I clicked on the little fan icon, in the dashboard “widget”, and a panel opened with a slider for fan speed. Spins To change your Blue Series Fan + Light Module from an Exhaust Fan to an On/Off Fan or vice versa in Home Assistant, please follow the instructions below: Find the device inside of Home This Blueprint is for controlling a 3 speed fan based on a temp sensor reading. 96 KB Sonoff iFan03 & Home Assistant. Works seamlessly with or without Home Assistant automation or a constant network connection. Seems to work alright. Temperature inside the networking rack is always higher than ambient due to all the equipment so my goal is to bring it down as Home Assistant Community Turn on ceiling fan when above a threshold temperature. unicon (Unintended Consequences) November 12, 2023, 6:27am 41. I’m using a Broadlink RM4 Pro I have gotten the light and switch to both work but no matter what I tried I cannot get the fan speed to work with Home assistant. set_speed service is deprecated and will fail in 2022. I have had 3 speed bond controlled fans and I have had 3/10 speed tuya controlled fans. Ceiling Fan Modes: 3 Speed Fan: Controls the fan with 3 speeds based on room temperature. Now I should only “glue” the things together. sensor. This was done for my personnal use and I Use a template fan: https://www. My goal is to get the fan speed then turn ON one of my 3 relay switch according to fan speed. In the script turn everything off for preset off; I am in the process of moving over from SmartThings to HA and wanted to share how I built a controller for my two QuietCool 3 speed whole house fans. The Home Assistant implements fan speed control with four s Home Assistant Community HomeKit fan speed support. I wanted to use PID Climate component to determine which speed is better to get to the target Hey all! I have 3 tuya wifi switches that I’ve made to wirelessly control a fan’s speed. 00000 s with 3 decimals of accuracy. Yes, this Integrates Big Ass Fans devices into Home Assistant. xml (2. I’m trying to make my broadlink rm pro working with my samsung robot vacuum. I have a GE ZW4002, and if it’s manually turned on, the first setting does nothing to the fan. Of the vacuum cleaner. I am happy with Sonoff iFan03 switching my 3-speed fan + light. 17. I use Template Vacuum and Smartthings set up my vacuum robot. ampersandru (Ampersandru I have some fan speed automations to slow down/ speed up fans, one ‘feature’ I am trying to implement is to ensure the fan stays on the manually set speed for a while, before then changing to the ‘auto speed’. I tried this command - but it does not help me a lot. However, this move can be cumbersome for Alexa. All the configured features are working fine and it shows up on my dashboard like this: However, I have some questions about this: The “preset” configuration (i. I’m trying to address entities ESPhome & Homeassistant) that I have on the ESPhome device with a call service under Node-Red. Available for free at home-assistant. The ceiling fan is nothing special as the it is the wall switches that will be connected to HA . walrus_parka March 5, 2021, 6:35pm 1. freshcoast (Z-Wave AI Bot) [34, 66]. I’m struggling with the set_speed part of the template. shred December 12, 2018, 7:53am 1. I can turn the fan on and off but for some reason it won’t let me do any speed control on SmartThings this was as simple as saying “set fan to 50%” it would control the fan switch just like any other dimmer it seems like that’s the way it used to be in I did some searches to try to figure out how to turn on the fan speed controller and set a value (speed) through an automation but came up empty handed. That’s I was finally able to figure it out using this page: Martin Jerry Fan Speed Controller US-FC-01 | digiblurDIY My old configuration worked, i just had to get the top bit right, this is what my configuration looks like now: Enter home assistant, which I have 0 prior experience with but I figured it could save the day here and smarten up my fan a bit. https://community. io, the variable percentage I have a 3 speed fan controlled by a sonoff 4channel in interlock mode (tasmota). Home Assistant 2022. I would like to control the fan speed using discrete values: Low (25%), Medium (50%), Medium-High (75%), and High (100%) from the entity card in Lovelace. I’m not very familiar with scripts in homeassistant, I found the following to use for my lights and its working In plain words: What is you actual fan, and how is it connected to Home Assistant. I just unplugged my bond because I upgraded the last fan that was rf only to wifi which is controlled through local tuya. Haiku Fans with 3. And I’m not the only one. I have previously created a fan with a pushbutton to alternate between 3 speeds (low, medium, high). fan. Relevant info: I’m using a Jasco GE ZWave Plus 3-speed fan controller with the lastest version of HA. So you have fan control in home assistant, and you can set the fan speed to off, low, medium and high? And you have a temperature sensor? To enable template fans in your installation, add the following to yourconfiguration. I also use automations based on the temp to set the fan speed as my office tends to get a bit warm. I have a dumb-fan which I turned into a smart-fan using a Shelly UNI. Run cable from light cable of ifan02 into the larger value side of the capacitor normally 3 speed fan caps use a 6uF and 3 uF for low and medium speeds respectively. Z-Wave. sh00t2kill January 9, 2024, 10:39pm 3. 6v = medium speed 11. Benefit from built-in safeguards for Unfortunately HAAS expects a percentage to actually be a percentage, so when homekit reports the fan is at 3% home assistant doesn't see full speed it sees "nearly off". Heres the relevant part of the config, this isn’t the only thing Ive tried Hi, I’m totally newbie writing HA templates and I created the next script to use in a fan template entity. g. When the temperature reaches 21. I thought having a 10 speed fan was ridiculous but its I have two switches that control a fan and its speed, one for on/off and the other for high/low. I have D2 connected directly to the sensor pin at the CPU fan (the Wemos D1 mini uses common gound with the fan). I do not know how to get a working dropdown with IR commands as shown in other posts. Here is my configuration: vacuum: - platform: template vacuums: Thanks for the help; Essentially what i am trying to do is be able to change the fan speed of my aircon; i have setup 3 separate automations that are triggered by the input select; I am trying to have my input select change to whichever state my aircon entities fan mode is on Such as if someone sets the fan speed using the izones controller, i would like the fan speed Hi all, I have a 3 speed ceiling fan with light, it only has one switch, so currently I control it with the attached strings. This seems to work, but you have to click on the speed you want a few times to get the fan to adjust. 3. The fan. While the fan is on low, medium, or high, the “off” button remains highlighted and no So I purchased a ceiling fan that came with the Hampton Bay HD3 fan controller with the plan to set it up with a BroadLink rm pro to integrate it into home assistant. sb151 March 30, 2024, 3:33pm 1. I have 3 script: speed 1, speed 2, speed 3 How do I call those script to set fan s Greetings awesome people! My house has a ventilation system which I’m trying to automate. Is there a variable speed fan control solution in HA? At this point, I don’t care what I have to do to make this work, short of safety hazards like using a dimmer So here’s the situation: I have a new BroadLink RM4 pro and it learned the RF commands for my ceiling fan. The template only helps me to turn on the fan and running it again does not change the speed, but the fan speed stays the same. It would be great if the oscillating angle I have a couple rack cabinets in my Media Room which hold all my networking and NAS gear. Something like this Hunter controller would work, put not a fan ( 😃 ) of having to add another controller. You have to choose another fan speed to start it again. Both relays closed for medium speed. I needed to add the speed level (percentage) for a mid temperature and a max temperature. I want controling Fan Coil in HA. The ventilation has 3 speeds: High Medium Low I installed a Shelly double switch to turn on either medium or high. 1 Like. Panels powered by WLED. Both power and speed can still be controlled manually by physical switches. I have connected my Tuya fan to HA using Tuya component. Somebody, please help me achieve this data_template: speed: >- {%set To interface with the game API this guy made a nodejs client which was later “translated” to python by this other project. Development. I tested the script and works fine changing the slider and executing it, but I don’t have idea how to pass the input_number like an argument to the script inside the fan template. and if not achievable with homeassitant I have ESPhome running as well and just started to move all my devices from tasmota to ESPhome. i changed now to “turn_on” now i have the connection free. I’m using the slider-entity-row frontend HACS custom card. At the moment it just goes back to whatever was last set in home assistant. hope someone can help me. Sergeantpup January 19, 2022, 3:14pm 4. com When I went to setup on automation to be able to increase/decrease the fan speed, the drop down menu only shows on, off, and toggle on. 2 ohm 1/4W x2 This all components I’m using to control the fan speed But it doesn’t seem to work speed 1,2 and 3 don’t work but 4 (I have an array fan, so I hit 3 buttons to increase the overall speed by 1 step) You can customise this to your needs as the final action script from the speed interpretation inside the Bedroom_fan_set_speed. Configuration. io/integrations/fan. I have a Lutron Caseta Fan switch controlling a ceiling fan. Is there any kind of add-on controller for a ceiling fan. Perfect to run on a Raspberry Pi or a local server. Home Assistant Community ZWaveJS - Fan Speed/Dimmer Control. It seems like it would be slightly more intuitive to people who aren’t HA wizards to be able to control fans with traditional words like “low”, “medium”, and “high”. 0 KB) which use the python zwift client to get game data and send it to a mqtt topic which is read using the mqtt and template sensors component: In the official integration, I can select the device, then controls, then the fan, then the ‘3 sliders’ icon and change the speed. - switch. 0v = off 6. I used a Broadlink RM4 Pro and had to teach it the RF codes. time_for_sleep] Is it possible to set the icon color if I’m using ‘custom:multiple-entity-row’ based on the speed of my fan? This is the code I currently have: type: entities entities: - entity: fan. I have figured out how to set up an I have a few GE Fan Speed Switches that I can turn on and off through the ZwaveJS2MQTT interface (no speed control yet) and not through HA. prankousky (prankousky) June 21, 2023, 8:14am 1. 3 and later, use fan. Then, add it to Home Assistant AND make it 'Smart' ! 🎁Link Hi, I’ve built a ESP32 with a temp/hum sensor and 4 relays to control an HVAC that has 4 outputs: Valve (cool or heat depends on the season) Fan speed 1 Fan speed 2 Fan speed 3 I don’t need to control the valve as i don’t want the fan to work without hot or cold air. Gives you a slider and an on/off button on a single row. To start off, living in the SF Bay Area, a whole house fan is a requirement. I tried to do some translations and used a dummy mqtt subscription to port the values but had no luck. The issue is that I’m not seeing any fan speed controls on the fan panel. As shown by the diagram within the fan I just need to switch 240Vac onto terminals 1, 2&3, or 3 to select different speeds. However it was missing some key elements I thought worthy to add. He did the I am trying to make the CPU fan on my Raspberry Pi 4 work (Home Assistant 0. That’s great, thank you! I can control the speed, mode (nature / normal) and toggle oscillating mode. 7. I have seen remarks in other threads about being able to make the percentage speed control “snap” to certain percentages to mimic a low-med-high setting. Run Home Assistant version 2024. Hardware. Please forgive me, I’m so new to programming in Home Assistant. 07. Seems like the card does not reset the state when the fan is off. set_preset_mode instead. 3 A few months ago, we moved to using percentages for fan control. Hello iam looking for a ceiling fan card with have: light on / off button fan on/off button 6 speed buttons 3 lights temperatures is one button but I can choose 3 temperature summer/winter 3 time button sound of button. Is there any yaml code for sp Hi all! I’ve a problem in setting the speed of a fan via mqtt. ZW6HD for light dimmer switch. Template fan - Home Assistant doesn’t look to support all the same things either. The remote has only a - and + for speed control, as in the picture. Home Assistant Community Relay for exhaust fan 3-way switch. I was able to create the card layout by I don’t know how to interface to the custom component. I’m using Home Assistant as a dedicated controller for all my smart devices instead of separate apps. Low-resistance relay closed for high speed. I have some smart ceiling fans that turn on at previous running speed. This has been available for a long time. I’ve tried a heap of things but am completely lost. I have a dumb switch with 8-ish speeds they sell manual controllers with a dial. Est. You might be able to say “set fan to speed 4”, but I"m not sure if the 5-speed limitation is in play. It lists the integrations to be loaded and their specific configurations. 92. Does anyone Hi there, I want to set up a fan template, which I can control with the following 3 command: Power (toggle between on and off - named: Fan_Power) Increase Speed (Named: Fan_Plus) Decrease speed (Named: Fan_Minus) In total I have 6 speed levels. Walt750 (Walter coria) April 16, 2024, 2:22am 3. I am running Home Assistant on my Windows NUC via VirtualBox. They have a 3 pin I’ve got a fan who’s state/speed is controlled with esphome and two relays - exposed to homeassistant as switches: High-resistance relay closed for low speed. I am wanting to have them turn on each morning back at Speed 1 or Low (they are 3 speed). So, what you are saying is that the fan template is there in order to pave the way for further developments (either official HA or third party). Now with the new update I need to change this in order to modify the code, because individual speeds are deprecated. This totally makes sense as there are fans now with 6+ speed settings. Home Assistant Community Automation Help - Fan Setting. I was pretty happy to get this worked out. The following works from services, resulting in a toggle where I can send 'Off' or "Medium" depending on the current state of the fan. theCheek (The Cheek) August 21, 2020, 4:08am 127. Objective Develop a Smart Wood Pellet Stove System Goal Override the manufacturer’s I am trying to find a Home Assistant compatible ceiling fan speed controller that meets my requirements. Just for reference, I’m in the US, so I’m hoping not to have to send overseas for hardware. #fan_speed #esp #home_assistantControl fan with 3 speed using Home Assistant and touch switch by ESPHome. I don’t need any control of the fans, I just want HASS to show and record the history of it, like it I’m trying to create a script to increase my fan speed so I can trigger the speed with my harmony through emulated_roku. To add the Big Ass Fans integration to your Home Assistant instance Google home picks up both too. 2) and using a ifan02 flashed with tasmota, the fan control is working fine through lovelace and google assistant. yaml file is the main configuration file for Home Assistant. This is a simple script that can be called to increase or decrease the speed of a fan, simulating the traditional physical pull-chain. components. Yes I have separate Zwave switches for the fan lights. fan speed controller module/unit that can be hidden under the ceiling-fan canopy and control my existing 230 volt 3-speed AC ceiling fans and the 4-speed AC kitchen exhaust fan, (please Hello, I need help with designing esp based fan controller for FCU. Wondered if other people have had success yet with their fan switches. The speed will be set when first turn the fan on, a customizable delay is used to avoid changing the fan too frequently. script, templates. Maybe the action’s metadata can also be templated to allow fan Need help with controls. fan. The fan has a push-button to set the speed by cycling through modes, and I measure that speed using an ADC sensor. Using Nabu Casa or manual integration, Google Home/Assistant only sees it as a simple switch. The issue seems to be that there’s no speed or value entity for the device, so I can’t select the desired entity in the automation to set The System Monitor integration uses psutil so I figured I could use this command line sensor to obtain the CPU fan rpm: - platform: command_line name: CPU Fan RPM command: "psutil. Home Assistant Community [Guide]Template Fan and Broadlink. 0 (as this version is where support for the fan + light module was added) Compatible Zigbee USB Sticks. Thanks! Home Assistant Community Dyson - set fan speed in lovelace Home Assistant 2033×1928 130 KB. last_changed) | round > Hi, I use one of the Girier Zigbee switch modules below to control my 3 speed extractor based on humidity i. But it means I need to set the speed of the fan in I have switched my fan entities in the UI to GitHub - finity69x2/fan-percent-button-row: Frontend plugin to control fans in Home Assistant using percent values for speeds and updated all my automatons to use percent instead of speed. 3 Home Assistant OS 8. I have it currently plugged into a Wemo smart plug so I turn it on 10mins into my warmup. A large part of this has been copied from another blueprint made by @MickW69. Configuration . Fan Speed Control dps: 3(value: level_4) Fan speed modes list (overrides speed min/max): level_1,level_2,level_3,level_4. You can also tell it to increase or decrease the speed and it will go adjust the speed number up or down. If they’re all off, the fan is off, if the first one is on, then the fan turns on at the lowest speed, the second one turns on the medium speed and the third, obviously, the fastest speed. Since this is a script, you can choose how you trigger it from an automation Hey guys, I have a problem setting up fan speed in template fan. sensor: - platform: template sensors: wall_e_. That’s way more flexible than only supporting a Fan or a Switch as it currently does – combining this with the lack of ability to define a virtual switch (e. First off, I’m a Python newbie and only started The correct combination of these actuators determines the appropriate fan level: A 0 B 0 C 0 D 0 = Level 2 A 0 B 0 C 0 D 1 = Level 1 And so on How can I create a 4-stage slider or fan controller in Home Assistant that sets the correct actuators to the correct positions? C Hey all, off the bat, apologies if this has been posted before (it was fairly trivial, I’d be surprised it if hasn’t, although I wasn’t able to find anything when searching). In some cases, the configuration needs to be edited manually dire I am currently working to build out a node utilizing three relays with interlocks to control a three speed fan from HASS. Thanks for pointing me in the right direction @armedad. septillion (Timo) August 11, 2021, 8:00am 10. mhcdgvu dtvqox snjl mufal jbncmw vzpuy tzx fruhm smls fnli